Aqua Siser EasyReflective Heat Transfer Vinyl (HTV)

EasyReflective is Siser’s reflective heat transfer vinyl with a frosted pressure sensitive (sticky) carrier! This highly reflective heat transfer vinyl is truly an exceptional polyurethane product due to its glass bead construction that illuminates the darkest of conditions. The pressure sensitive carrier allows you to re-stick lifting material or replace a piece that’s accidentally weeded away. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply Siser reflective heat transfer vinyl with a heat press or home iron for increased visibility on sports garments, pet clothes, construction crew uniforms, and more!

EasyReflective is 140 Microns / 5.5 Mils and is a PU composition.

Siser EasyReflective Application Instructions

Blade: 45°
Cut: Mirror Image
Preheat: 2-3 seconds
Temp: 305°F/105°C (EasyPress users add approx. 30°)
Pressure: Medium
Time: 10-15 seconds
Peel: Warm Peel

Home Iron Instructions

• Set iron dial between Cotton and Linen
• Cover with PTFE Teflon Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• Peel carrier warm
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds

Laundering Instructions

Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean. Liquid fabric softener not recommended.