Direct-To-Film (DTF) Transfers

Magic Press & Go Direct-to-Film (DTF) transfers are full-color heat applied transfers for light and dark garments. No weeding or masking is required and direct-to-film prints can be applied to cotton, cotton/poly blends, and even 100% polyester.
Simply press and go! All you need is a heat press!

Current production time for DTF Transfers
is 24 hours excluding weekends and holidays.

DTF Print Transfer Application Instructions

If present, please trim off any color registration strips and order id information from around your image, using scissors. These will transfer to the garment if not removed.
Preheat the garment for 3-5 seconds to remove excess moisture. Let the garment cool before adding the transfer.
Place the transfer on the shirt – white side down, image facing up.
Press at 300°F for 15 seconds under very firm pressure.
Remove the garment from the press and let it stand until it is cool enough to peel.
Peel cool.
Cover the image with parchment paper and press again for 5 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.

***Please note: If the image does not come off completely, repress with the image in place, let it cool, and repeel the film.

Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.