Parart™ 3D Puff Heat Transfer Vinyl

Blade: 45°
Cut:Cut the Puff iron-on vinyl side up. Do not cut the carrier sheet. Mirror Image (Watch this video to learn how to determine which side to cut heat transfer vinyl.)

Standard Color & Glow In The Dark Parart 3D Puff HTV Instructions

Temp: 280 - 295°F (The temp for each color can vary between batches. It's highly recommended to perform a Test Press prior to applying your design.)
Pressure: Strong, Firm (3D Puff HTV requires more pressure than any other HTV we have ever pressed. A Cricut EasyPress is not recommended for this product.)
Time: 8-15 seconds
Peel: Warm Peel


Glitter Parart 3D Puff HTV Instructions
Temp: 285°F
Pressure: Strong, Firm
Time: 10 seconds
Peel: Warm/Hot Peel


Metallic Parart 3D Puff HTV Instructions
Metallic 3D Puff requires a 2-press application

Temp: 300°F (Perform a Test Press before applying your design.)
Pressure: Strong, Firm (A heat press is required)

Press #1: Press for 3 seconds and peel the carrier sheet once the htv is warm (Peeling while hot may lift the htv from the garment).

Press #2: Cover with a Teflon Sheet and press for 7 seconds.


Parart 3D Puff HTV Care Instructions: Wash inside out, with cold water, gentle cycle, and tumble dry low.