Rewards Program
No Products in the Cart
12" Siser EasyWeed EcoStretch Heat Transfer Vinyl
Go Green with EasyWeed® EcoStretch™!
Go Green with EasyWeed® EcoStretch™! Siser® continues the push for sustainability with EasyWeed® EcoStretch™! First introduced with our S-Print™ Digital Media, EasyWeed EcoStretch is made with an eco-friendly water-based solution as well. Yet it still retains the soft, lightweight, and stretchy qualities that you know and love! Plus, a super low application temperature of just 250°F means that your heat press uses less energy— which is also a win for your electrical bill. And when you’ve got scraps leftover, both the film and carrier are 100% recyclable! (Check with your local municipality for recycling guidelines.) With EasyWeed EcoStretch, you can continue to create high-quality garments while reducing our impact on the planet.
EasyWeed EcoStretch is 90 Microns / 3.5 Mils and is a water-based polyurethane composition.
*Actual width of 12" Siser EcoStretch is 11.8".
⚙️ Application Instructions
EasyWeed EcoStretch applies to:
100% Cotton
100% Polyester
Poly/Cotton Blends
Leather
Lycra® / Spandex
Siser EasyWeed EcoStretch Cut Settings for Craft and Professional Cutters
Settings may vary based on blade condition and age of machine. ALWAYS perform a test cut prior to cutting designs.
Siser Romeo™ and Juliet™
Blade: 45°
Force: 5-10
Offset: 0.250 Speed: 10
Cricut® Explore Air
Blade: AutoBlade
Setting: Vinyl+
Cricut® Maker
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Cricut)
Brother® Scan N Cut DX
Blade: Autoblade
Cut Speed: 5
Half Cut: Auto
Silhouette Cameo® 4
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6 Speed: 8
Roland® GX/GS-24
Blade: 45°
Force: 80-90 gf
Offset: 0.250 Speed: 30-50 cm/s
Graphtec®
Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0
Speed: 30 cm/s
Application Instructions
Home Iron Instructions
- Set iron dial between Cotton and Linen
- Cover with PTFE sheet, Parchment Paper, or Butcher Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- Peel carrier hot
Heat Press Instructions
- Cover with PTFE sheet, Parchment Paper, or Butcher Paper
- Preheat garment for 2-3 seconds
- Apply design at 250°F/120°C (EasyPress users add approx. 30°)
- Use medium pressure for 10-15 seconds
- Peel carrier hot
Click here for a printable version of all Siser HTV application instructions
Laundering
Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.
