Direct-To-Film (DTF) Transfers

Magic Press & Go Direct-to-Film (DTF) transfers are full-color heat applied transfers for light and dark garments. No weeding or masking is required and direct-to-film prints can be applied to cotton, cotton/poly blends, and even 100% polyester.
Simply press and go! All you need is a heat press!

Current production time for DTF Transfers
is 24 to 48 hours excluding weekends and holidays.

DTF Print Transfer Application Instructions

• If present, please trim off any color registration strips and order id information from around your image, using scissors. These will transfer to the garment if not removed.
• Preheat the garment for 3-5 seconds to remove excess moisture. Let the garment cool before adding the transfer.
• Place the transfer on the shirt – white side down, image facing up.
• Press at 300°F for 15 seconds under very firm pressure.
• Remove the garment from the press and let it stand until it is cool enough to peel.
• Peel cool.
• Cover the image with parchment paper and press again for 5 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.

***Please note: If the image does not come off completely, repress with the image in place, let it cool, and repeel the film.

Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.

Custom DTF Transfers