Siser EasyWeed EcoStretch Heat Transfer Vinyl

Go Green with EasyWeed® EcoStretch™!

Go Green with EasyWeed® EcoStretch™! Siser® continues the push for sustainability with EasyWeed® EcoStretch™! First introduced with our S-Print™ Digital Media, EasyWeed EcoStretch is made with an eco-friendly water-based solution as well. Yet it still retains the soft, lightweight, and stretchy qualities that you know and love! Plus, a super low application temperature of just 250°F means that your heat press uses less energy— which is also a win for your electrical bill. And when you’ve got scraps leftover, both the film and carrier are 100% recyclable! (Check with your local municipality for recycling guidelines.) With EasyWeed EcoStretch, you can continue to create high-quality gar Yet, it still retains the soft, lightweight, and stretchy qualities that you know and love! Plus, a super low application temperature of just 250°F means that your heat press uses less energy— which is also a win for your electrical bill. And when you’ve got scraps leftover, both the film and carrier are 100% recyclable! (Check with your local municipality for recycling guidelines.) With EasyWeed EcoStretch eco-friendly heat transfer vinyl, you can continue to create high-quality garments while reducing our impact on the planet.

EasyWeed EcoStretch is 90 Microns / 3.5 Mils and is a water-based polyurethane composition.

EcoStretch is laser friendly, layerable, iron-on, and CPSIA Certified

⚙️ Application Instructions

*Actual width of 12" Siser EcoStretch is 11.8". Actual width of 20" Siser EcoStretch is 19.8".

12" Siser EasyWeed EcoStretch HTV

20" Siser EasyWeed EcoStretch HTV

EasyWeed EcoStretch applies to:

100% Cotton

100% Polyester

Poly/Cotton Blends

Leather

Lycra® / Spandex

Siser EasyWeed EcoStretch Cut Settings for Craft and Professional Cutters

Settings may vary based on blade condition and age of machine. ALWAYS perform a test cut prior to cutting designs.

Siser Romeo™ and Juliet™

Cricut® Explore Air

Blade: 45°
Force: 5-10
Offset: 0.250 Speed: 10

Cricut® Explore Air

Cricut® Explore Air

Blade: AutoBlade
Setting: Vinyl+

Cricut® Maker

Cricut® Maker

Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Cricut)

Brother® Scan N Cut DX

Brother® Scan N Cut DX

Blade: Autoblade
Cut Speed: 5
Half Cut: Auto

Silhouette Cameo® 4

Silhouette Cameo® 4

Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6 Speed: 8

Roland® GX/GS-24

Roland® GX/GS-24

Blade: 45°
Force: 80-90 gf
Offset: 0.250 Speed: 30-50 cm/s

Graphtec®

Graphtec®

Blade: 45°
Gram Force: 8-9
Tool: CBO9U+0
Speed: 30 cm/s

Application Instructions

Home Iron Instructions

Set iron dial between Cotton and Linen
Cover with PTFE sheet, Parchment Paper, or Butcher Paper
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 10-15 seconds
Peel carrier hot

Heat Press Instructions

Cover with PTFE sheet, Parchment Paper, or Butcher Paper
Preheat garment for 2-3 seconds
Apply design at 250°F/120°C (EasyPress users add approx. 30°)
Use medium pressure for 10-15 seconds
Peel carrier hot

Click here for a printable version of all Siser HTV application instructions

Laundering

Laundering: Wait 24 hours before first wash. Machine wash warm or cold with mild detergent. Dry on normal dryer setting. Do not dry clean.